Need help?Do you have a question about the Harman Kardon AVR 370 and is the answer not in the manual?
General| Impedance | 8 Ω |
|---|---|
| Receiver type | Surround |
| Input sensitivity | 200 mV |
| Audio output channels | 7.2 channels |
| Signal-to-Noise Ratio (SNR) | 100 dB |
| Total Harmonic Distortion (THD) | 0.07 % |
| Power output per channel (20-20KHz@8 Ohm) | 125 W |
| HDMI in | 8 |
| AC (power) in | Yes |
| Ethernet LAN (RJ-45) ports | 1 |
| Number of HDMI outputs | 2 |
| Speakers connectivity type | - |
| AM band range | 520 - 1620 kHz |
| FM band range | 87.5 - 108 MHz |
| Supported radio bands | AM, FM |
| Analog signal format system | NTSC, PAL |
| HDMI version | 1.4a |
| Product color | Black |
| Audio decoders | Dolby Digital, Dolby Pro Logic, Dolby Pro Logic II, Dolby TrueHD, DTS, DTS-HD |
| AC input voltage | 230 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (typical) | 120 W |
| Cables included | AC |
Weight and Dimensions| Depth | 382 mm |
|---|---|
| Width | 440 mm |
| Height | 165 mm |
| Weight | 8000 g |
Calibrating speakers and connecting radio antennas.
Connecting the AVR to a wall outlet using the provided power cord.
How to bring up the AVR's on-screen display (OSD) setup menu.
Selecting and assigning input connectors to specific source buttons.
Selecting specific video and audio input connectors for source assignments.
To Next Page