Need help?Do you have a question about the Harman Kardon AVR 350 and is the answer not in the manual?
General| Type | AV Receiver |
|---|---|
| Channels | 7.1 |
| HDMI Inputs | 3 |
| HDMI Outputs | 1 |
| Component Video Inputs | 2 |
| Component Video Outputs | 1 |
| Total Harmonic Distortion | 0.07% |
| Digital Audio Inputs | 2 Coaxial |
| Surround Sound Formats | Dolby Digital, Dolby Pro Logic II, DTS |
| Frequency Response | 10Hz to 100kHz |
| Input Sensitivity | 200mV |
| Signal-to-Noise Ratio | 100dB |
| Video Inputs | Composite: 4, S-Video: 4, Component: 2 |
| HDMI | Yes |
| Weight | 28.7 lbs (13 kg) |
| Audio Inputs | 8 (Analog) |
Covers critical operating and safety guidelines for the device, including power, connections, and handling.
Details the receiver's audio output power, amplifier design, and sound processing capabilities.
Describes the various input and output options for audio and video signals.
Explains power switches, indicators, and the message display.
Covers selecting sources and tuning radio stations.
Details volume, tone, and surround mode adjustments.
Details connections for AM/FM/XM antennas and speaker outputs.
Covers CD, Tape, Coaxial, and Optical digital audio connections.
Explains subwoofer, preamp, and surround back/multiroom preamp outputs.
Explains Component video connections.
Describes video inputs, monitor outputs, and HDMI interface.
Explains IR transmitter, indicators, and device selection.
Covers powering devices and selecting source components.
Details selecting sources and tuning radio/XM.
Covers volume, tone, surround modes, and functions like Learn/Test Tone.
Explains programming macros, selecting surround modes, and night mode.
Explains how to connect speakers using binding posts or banana plugs.
Discusses analog and digital audio connection formats.
Details RCA and multichannel analog audio hookups.
Details connecting a powered subwoofer via line-level input.
Focuses on HDMI capabilities and connections.
Guides on connecting various audio/video sources to the receiver.
Covers composite, S-video, and component video connections.
Step-by-step guide for connecting speakers and the subwoofer.
Explains how to connect the AVR's video outputs to a display.
Covers connecting antennas and various source devices.
Details connecting the AC power cord and accessory outlet.
Guides on programming the remote to control other devices.
Guides on setting up speaker size and number for auto-config.
Guides on using the automated system for speaker calibration.
Details connecting the microphone for automated setup.
Details what EzSet/EQ measures and adjusts (volume, level, distance).
Assigns inputs to specific source devices.
Explains the power-on sequence and modes.
Guides on choosing desired audio surround sound effects.
Explains how to choose active input sources.
Guides on manually configuring speaker size, distance, crossover, and levels.
To Next Page
