Harman Kardon AVR 355

AVR 255/AVR 355 Audio/ Video Receiver
OWNER’S MANUAL
Composit
AVR
Info
Resolution Audio Effects
Video Modes
Surround Modes
Back/Exit
Source List
AB
LK
OK
ENGLISH

Harman Kardon AVR 355 Specifications

General

Total Harmonic Distortion (THD)	0.07%
HDMI Inputs	3
HDMI Outputs	1
Signal to Noise Ratio	100 dB
Width	440 mm
Video Upconversion	Yes
Audio Formats Supported	Dolby Digital
Audio Decoders	Dolby Digital

Summary

Introduction

Description and Features

Details the AVR as the hub of a home entertainment system, offering broad listening possibilities.

Safety Information

Important Safety Information

Crucial guidelines for safe installation and operation to prevent hazards and damage.

Installation Safety Precautions

Guidance on electrical safety, line voltage, extension cords, and cabinet access.

Installation Location

Guidance on proper placement for optimal operation and safety, considering ventilation and surface.

Cleaning and Maintenance

Instructions for cleaning the unit using soft cloths and mild soap; avoiding harsh chemicals.

Moving and Unpacking

Steps to safely disconnect, move, and unpack the unit, including saving materials.

Front Panel Controls

Control Descriptions

Detailed descriptions of each button, display, and jack on the AVR's front panel.

Rear Panel Connections

Connection Descriptions

Explanation of all input/output jacks and terminals on the rear panel for system connectivity.

Main Remote Control Functions

Remote Button Functions

Detailed explanations of each button's function on the AVR's main remote control.

Zone 2 Remote Control Functions

Zone 2 Remote Button Functions

Detailed explanations of each button's function on the Zone 2 remote control.

Installation and Connections

Audio and HDMI Connections

Guidance on connecting audio sources and understanding HDMI interface and versions.

HDMI InputOutput Connections

Details on connecting various HDMI version sources and the AVR's HDMI output.

Analog and Digital InputOutput Connections

Detailed instructions for connecting various analog and digital audio/video sources.

Antenna and Speaker Connections

Guidance on connecting AM/FM antennas and front/center/surround speakers.

Subwoofer and Multi-Channel Connections

Instructions for connecting subwoofers and external multi-channel audio sources.

Video Equipment Connections

Guidance on connecting video sources like VCRs, DVD players, and component video devices.

System and Power Connections

Remote Control Extension and Linking

Connecting IR sensors for remote control of AVR and multiroom operation.

Multiroom Audio and A-BUS Connections

Options for feeding audio to a second zone using line-level outputs or A-BUS modules.

AC Power Connections

Information on connecting the AC power cord and using the accessory AC outlet.

Speaker Setup and Placement

Speaker Selection

Guidelines for choosing compatible front, center, and surround speakers for optimal soundstage.

Speaker Placement Guidelines

Recommendations for optimal speaker placement in a multichannel system for improved sound.

System Configuration

Subwoofer Placement

Guidance on optimal placement of subwoofers for best sound quality based on room acoustics.

First Turn On and Setup

Steps for powering up the AVR and initial setup procedures using on-screen display.

Source Selection and System Setup

Selecting input sources and configuring system preferences for each source.

AudioVideo Input and Source Setup

Assigning input jacks and adjusting settings for each source using the Source Info menu.

Audio and Video Mode Settings

Adjusting audio effects, video modes, and surround modes for optimal performance.

Resolution to Display

Setting the video output resolution to match the display capabilities for optimal picture.

Adjust Lip Sync and Change Name

Resynchronizing audio/video and customizing source names for better usability.

Audio Input Polling and Zone 2 Audio

Managing audio input selection and setting analog audio sources for Zone 2.

Speaker Setup

Speaker Setup Configuration

Configuring speaker settings, including automatic calibration with EzSet/EQ.

Manual Setup

Determine Speaker Crossover

Determining speaker crossover frequencies manually for bass management.

Measure Speaker Distances

Measuring and recording speaker distances from the listening position for delay settings.

Manual Setup Menu Navigation

Navigating the manual setup menu to configure speaker settings like crossover and submode.

Number of Speakers Configuration

Configuring the number of speakers present in the system for correct operation.

Adjust Crossover Frequencies

Setting crossover frequencies for each speaker group based on technical specifications.

Subwoofer Mode Configuration

Programming bass management settings for the subwoofer based on front speaker configuration.

Adjust Speaker Distance Menu

Entering measured speaker distances into the menu for delay adjustments.

Setting Channel Output Levels Manually

Adjusting individual channel output levels using test tones or source material.

Reset Speaker Levels

Resetting all speaker output levels to factory defaults of 0dB.

Test Tone Settings

Configuring the test tone setting for adjusting speaker levels manually or automatically.

Operation

Surround Mode Chart

Details various surround sound modes available, their features, and typical sources.

Basic Operation

Simple instructions for turning the AVR on/off and using basic functions like volume and sleep timer.

Mute Function

Temporarily silencing all speaker outputs and headphone jack without affecting recordings.

Source Selection and Video Input

Selecting input sources and assigning video inputs for proper playback.

Video Troubleshooting Tips

Troubleshooting steps for no picture or display issues, including HDMI connection advice.

Controls and Use of Headphones

Adjusting volume, muting, and using Dolby Headphone modes for private listening.

Surround Mode Selection

Selecting surround modes based on program material and personal preference.

Digital Audio Signals

Understanding digital audio signal capacity, channel formats, and their benefits.

Surround Modes

Selecting surround modes based on program material and personal preference.

Dolby Surround Settings

Adjusting Center Width, Dimension, and Panorama for Dolby Pro Logic II/IIx Music modes.

Night Mode

Compressing peak sound levels for clearer dialogue and reduced loudness of special effects.

Tape Recording

Sending selected audio/video sources to record outputs for recording on connected machines.

Using The Bridge (AVR 355 only)

Connecting and operating an iPod via The Bridge for audio/video playback.

Memory Backup

System preserves settings for approximately two weeks if power is interrupted.

Multiroom Operation

Multiroom System Overview

Operating a complete multiroom system, sending one source to a second zone.

Surround Amplifier Channel Assignment

Assigning surround back amplifier channels to power remote zone speakers for 5.1 operation.

Video Adjustments

Video Modes

Adjusting picture settings like brightness, contrast, color, and sharpness for optimal video quality.

Advanced Video Settings

Configuring noise reduction, MPEG noise reduction, and cross color suppression.

Audio Adjustments

Color and Sharpness

Adjusting color hue and sharpness for optimal picture clarity and natural appearance.

Audio Effects

Adjusting tone controls, LFE trim, and night mode settings for enhanced audio performance.

Advanced Features

Overview of advanced features that add extra flexibility to the unit's operation.

System Settings

Configuring system settings for easier receiver use, including front panel dimmer and language.

Resolution to Display

Setting the video output resolution to match the display capabilities for optimal picture.

Menu Appearance Settings

Adjusting OSD transparency, volume status message visibility, and menu timeout periods.

Screen Saver

Programming a timeout period for screen saver activation to prevent display burn-in.

Default Surround Mode

Setting the AVR to automatically select surround modes or use the last selected mode.

Tuner Operation

Selecting the Built-In Tuner

Steps for selecting the built-in tuner source, switching bands, and navigating radio screens.

RDS Operation

Utilizing RDS data to display station information, text, and time for enhanced radio listening.

Program Search (PTY)

Searching for specific program types (PTY) by following predefined steps.

Programming the Remote

Direct Code Entry

Easiest method to program the remote using three-digit codes for product control.

Auto-Search Method

Automatically searching for and programming remote codes when product type is unknown.

Code Readout

Reading stored remote control codes for future reference or verification.

Learning Codes from a Remote (AVR 355 Remote only)

Teaching the AVR remote to learn codes from other remote controls.

Erasing Learned Codes

Removing learned codes from a single button, device, or all devices on the remote.

Activity Programming (Macros)

Creating custom command sequences (macros) to automate system tasks with one button press.

Programmed Device Functions

Understanding how remote buttons change functions when controlling other devices.

Notes on Using the AVR Remote With Other Devices

Tips for using the remote with various devices, including code sets and function correspondence.

Punch-Through Programming

Allowing simultaneous control of main device functions and another component's controls.

Resetting the Remote Memory

Resetting the remote to factory defaults to erase all programmed commands and codes.

Function List AVR 355

Remote Control Function Mapping

Table mapping remote buttons to functions for AVR, Zone 2, FM, AM, DVD, and DVDR.

Function List AVR 255

Remote Control Function Mapping

Table mapping remote buttons to functions for AVR, Zone 2, FM, Radio, and DVD.

Troubleshooting Guide

Common Symptoms and Solutions

Troubleshooting common issues like no power, no sound, remote unresponsiveness, and display problems.

Processor Reset Procedure

Steps to reset the AVR's memory and microprocessor to resolve system malfunctions.

Technical Specifications

Audio and Tuner Specifications

Detailed technical specifications for audio output, surround modes, and FM/AM tuner performance.

Video and General Specifications

Technical details for video input/output, power, dimensions, weight, and certifications.

Appendix - Settings Worksheet

Source Component Connections

Recommended connections for various device types to AVR sources.

Source Setting Defaults

Default settings for surround modes, video/audio inputs, and resolution for each source.

SpeakerChannel Setting Defaults

Default speaker and channel settings, including crossover, size, and levels.

Delay Setting Defaults

Default speaker distance and A/V sync delay settings for optimal audio-visual synchronization.

Source Settings Worksheet

Worksheet to record custom surround modes, video/audio inputs, and resolution for each source.

Audio Effects Settings Worksheet

Worksheet to record custom tone control, treble, bass, LFE trim, and night mode settings.

Video Modes Settings Worksheet

Worksheet to record custom video mode, brightness, contrast, color, and sharpness settings.

Surround Modes Worksheet

Worksheet to record custom surround mode settings for various sources and modes.

Remote Control Codes Worksheet

Worksheet to record product codes and device types for programmed remote functions.

System Settings Worksheet

Worksheet to record custom system settings like dimmer, volume defaults, and language.

Zone 2 Settings Worksheet

Worksheet to record custom settings for Zone 2 operation, including status, source, and volume.