Harman Kardon AVR20 II

Stereo Mode
Continuous Average Power (FTC)
60 Watts from 20Hz-20kHz:
Five Channel Surround Mode
Continuous average power per channel! (FTC)
Front L&R channels
50 Watts from 20Hz-20kHz:
Center channel
50 Watts at 1kHz:
Rear channels
20 Watts at 1KHz:
Amplifier Section
High-Instantaneous Current Capability
(HCC):
Negative Feedback:
Frequency Response @1W (+0/-3dB):
Slew Rate:
Rise Time:
Transient intermodulation Distortion (TIM):
Preamplifier Section
Signal-to-Noise Ratio (ref. 1 Volt, A-Wtd)
| Phono (MM):
CD:
Video:
‘Input Sensitivity/impedance
Phono (MM):
Video, CD, Tape:
19
Specifications
@<0.09% THD,,
both channels driven into 8 Ohms
@<0.3% THD,
both channels driven into 8 Ohms
@<0.3% THD,
driven into 8 Ohms
@<1.0% THD, |
both channels driven into 8 Ohms
+30 Amps
26dB
0.5Hz - 150kHz
80 Voits/uSec
1.8uSec
Unmeasurable
74dB
92dB
84dB
2.5mV/47kQ, 125pF
150mV/22kQ
Phono Overload:
RIAA EQ Accuracy (20Hz-20kHz):
Tone Control Range
Bass @ 100Hz:
Trable @ 10kHz:
Loudness Counter @ -40dB, 100 Hz/10kHz:
Tuner Section: FM
Usable Sensitivity, Mono (dBf):
50dB Quieting Sensitivity, Stereo (dBf):
- Signal-to-Noise Ratio @ 65dBf, mono/stereo:
Capture Ratio:
Selectivity, Adjacent/Alternate Channel:
IF Rejection:
AM Rejection @45aBf:
Stereo Separation @ 1kHz, 65dBf:
THD @ 1kHz, 65dBf, mono/stereo (%):
Tuner Section: AM
Sensitivity, External Antenna:
Alternate Channel Selectivity:
Image Rejection:
IF Rejection:
Dimensions (WxHxD):
inches:
mm:
Weight (ibs/kgs):
140mV
+1.0dB
+10dB
+10dB
+7dB/+3dB
11.2
37.2
74dB/70dB
2.0dB
5dB/65dB
100dB
55dB
45dB
2/3
25uV
55dB
35dB
60dB
17 4 X44%X 14%
440 x 125 x 380
23.59/10.7
Depth measurement includes knobs, buttons and antennas.
Height measurement includes feet.
All features and specifications are subject to change without notice.
Bosses: SSMS Beas user meaner:
— + |
Suseenes: Buensesee seenvens oe
PARA oR RK ES ae SIBSOKE SE Beees as
SIRES : : SSRRo Shee Beneerer: