To Next PageTo Next Page
Need help?Do you have a question about the Harman Kardon AVR247 and is the answer not in the manual?
General| Number of Channels | 7.1 |
|---|---|
| HDMI Inputs | 2 |
| HDMI Outputs | 1 |
| Dolby Digital | Yes |
| DTS | Yes |
| Type | AV Receiver |
| Input Sensitivity | 200 mV |
| Signal to Noise Ratio | 100 dB |
| Total Harmonic Distortion | 0.07% |
| Component Video Inputs | 3 |
| Component Video Outputs | 1 |
| Power Output | 50 Watts per channel |
| Surround Sound Formats | Dolby Digital, DTS, Dolby Pro Logic II |
| Video Inputs | Composite, S-Video |
| Video Outputs | Composite, S-Video |
| Dimensions | 440 x 165 x 382 mm |
| Frequency Response | 10 Hz - 100 kHz |
| Audio Inputs | Analog, Optical, Coaxial |
Procedure for checking leakage current to earth ground to ensure insulation.
Ports for analog/digital audio/video signals, HDMI, and RS-232 serial.
Guidance on connecting various audio/video source components to the AVR.
Using HDMI for digital audio/video and upscaling capabilities.
Procedure for factory resetting the AVR 247 unit to resolve issues.
