To Next PageTo Next Page
Need help?Do you have a question about the Harman Kardon AVR340 and is the answer not in the manual?
General| Channels | 7.1 |
|---|---|
| Total Harmonic Distortion | 0.07% |
| Frequency Response | 10 Hz - 100 kHz |
| Type | AV Receiver |
| Input Sensitivity | 200 mV |
| Signal to Noise Ratio | 100 dB |
| Audio D/A Converter | 24-bit/192 kHz |
| HDMI Inputs | 2 |
| HDMI Outputs | 1 |
| Input Impedance | 47 kΩ |
| Digital audio output | 1 optical |
| Surround Sound Formats | Dolby Digital, DTS |
| Video Inputs | Component, Composite |
| Power Output (per channel) | 55 Watts @ 8 Ohms |
Procedure for measuring leakage current to ensure safety before returning the appliance.
Button to apply power to the AVR 340, placing it in Standby mode.
LED indicator showing Standby (amber) or operation (blue) status.
Button to turn the AVR 340 on from Standby or off.
Button to adjust bass and treble boost/cut, or bypass tone controls.
Button to configure the unit to match the type of speakers used.
Selects the top-level group of surround modes (e.g., Dolby, DTS).
Cycles through available surround modes within the selected group.
Selects one of the digital or analog audio inputs for any source.
Changes the input by scrolling through the Input Indicators.
Trims channel output levels using an external audio source.
Knob to increase or decrease system volume.
Connects to an external amplifier for multizone distribution.
Selects device, source, and configures remote.
Switches remote to operate AVR 340 functions.
Cycles through DSP, VMAx, and Stereo surround modes.
Selects available Dolby Surround processing modes.
Scrolls through available DTS modes for DTS-encoded sources.
Selects from the available Logic 7 surround modes.
Selects Stereo or Surround Off modes for two-channel playback.
Selects DTS Neo:6 modes to create surround fields from stereo sources.
Configures the AVR 340’s bass management system for speakers.
Raises or lowers the system volume.
Steps for unpacking, positioning, and making initial connections.
Connecting analog and digital audio sources and recorders to the AVR.
Connecting VCRs, DVD players, TVs, satellite receivers, etc.
Options for sending audio to a remote zone using amplifier or AVR channels.
Connecting the AC power cord and accessory outlets.
Instructions for powering the unit on, off, and using the Sleep function.
Changing the audio/video input source using remote or front panel.
Information on using digital audio systems like Dolby Digital and DTS.
Details on Dolby Digital standard, LD discs, and HDTV system.
Information on DTS digital audio system and disc compatibility.
Reproducing multichannel surround sound from various sources.
Enables Dolby Digital input sources to be played with full intelligibility at low levels.
Tuning AM, FM, and FM Stereo broadcast stations.
Selecting stations manually, automatically, or via direct entry.
Storing up to 30 stations in memory for easy recall.
Manually selecting stored stations by number or scrolling.
Resets the unit's memory to clear abnormal operation or displays.
