To Next PageTo Next Page
Need help?Do you have a question about the Harman Kardon AVR245 and is the answer not in the manual?
General| Number of Channels | 7.1 |
|---|---|
| HDMI Inputs | 2 |
| HDMI Outputs | 1 |
| Dolby Digital | Yes |
| DTS | Yes |
| Weight | 12.7 kg |
| Type | AV Receiver |
| Input Sensitivity | 200mV |
| Tone control | Bass, Treble |
| Headphone output | Yes |
| Decoder | Dolby Digital, DTS |
| DSP | Yes |
| Tuner type | AM/FM |
| Number of preset stations | 30 |
| Remote control | Yes |
| Width | 440 mm |
| Height | 165 mm |
| Depth | 382 mm |
| Total Harmonic Distortion | 0.07% |
| Dimensions | 440 x 165 x 382 mm |
| Power Output | 50 watts per channel |
| Input Impedance | 47kohm |
| Digital inputs | Optical, Coaxial |
| Digital outputs | 1 Optical |
| Frequency Response | 10Hz - 100kHz |
| Video Inputs | Composite, S-Video, Component |
| Video Outputs | Composite, S-Video, Component |
| Audio Outputs | 7.1 channel |
| Audio Inputs | Analog |
Procedure to measure leakage current to earth ground to ensure safety.
Connect speaker wires to the AVR 245 speaker terminals.
Connect the Subwoofer Output to the subwoofer's line-level input.
Connect audio/video source devices to the AVR 245 inputs.
Connect the AVR 245 video outputs to your display (TV).
Connect AC power cords to all components.
Reset the AVR 245 to factory default settings.
