Harman Kardon GO+PLAY Wireless

Other manuals for Harman Kardon GO+PLAY Wireless

Questions and Answers

T
Terry YoungAug 18, 2025
Why is there distortion (static, crackling or hissing sounds) from my Harman Kardon Portable Speakers?
- Q
  qcookAug 18, 2025
  Distortion can stem from several sources: The audio source itself may have issues, so test the Harman Kardon Go + Play unit with another source. The volume might be too high, so check the source volume. Also, incorrect source selection can cause this, so ensure your iPod is properly docked or the auxiliary cable is correctly connected. Turn up the volume and test with a known good source, connecting the Aux In cable to the headphone jack of your iPod. Finally, the EQ setting may be too high, so check the EQ setting on your iPod or source device.
J
Jordan AdamsAug 20, 2025
How to fix distortion (static, crackling or hissing sounds) caused by interference in Harman Kardon GO+PLAY Wireless Portable Speakers?
- C
  Christopher DixonAug 21, 2025
  If you are experiencing distortion, it may be due to interference from nearby devices. Try moving the Harman Kardon Go + Play unit away from monitors, cell phones, or other transmitting devices to see if that eliminates the distortion.
P
peter23Aug 23, 2025
What to do if iPhone/iPod won't charge on Harman Kardon GO+PLAY Wireless Portable Speakers?
- V
  vincentbridgesAug 23, 2025
  If your iPhone/iPod is not charging via the USB port on your Harman Kardon portable speakers, ensure that the wall outlet or power strip has power and that all switches for the outlet/power strip and the unit are on. Also, make sure that the iPhone/iPod is seated securely into the docking station.
S
Samuel AvilaAug 26, 2025
How to troubleshoot no sound on Harman Kardon Portable Speakers?
- A
  Anthony AndrewsAug 26, 2025
  If there is no sound coming from your Harman Kardon Go + Play Wireless unit, first, ensure that the wall outlet or power strip has power and that all switches for the outlet/power strip and the unit are on. If you are not using the AC adapter, make sure that fresh batteries are installed correctly.
C
Cheryl ScottAug 28, 2025
What to do if my Harman Kardon Portable Speakers unit emits a loud hum or buzzing noise?
- M
  Mark BrooksAug 28, 2025
  A loud hum or buzzing noise can be due to several reasons. First, check the input cable connection to ensure it is properly plugged in. If the cable is damaged, replace it. Another potential cause is a ground loop; try turning off the Harman Kardon Go + Play unit and connecting it to another wall outlet.
D
David BrownAug 30, 2025
What to do if sound comes from only one side/channel of my Harman Kardon Portable Speakers?
- A
  Alexandria EvansAug 31, 2025
  If sound is only coming from one side, the iPod or auxiliary cable may not be seated properly. Ensure you're using the correct iPod adapter and that the iPod is fully seated in the docking station. Also, make sure the auxiliary cable is fully inserted into the jack and try resetting the iPod. In some cases, radio frequency interference might be the cause. In this case, purchase a ferrite core and wrap the excess cable around it.
B
Benjamin HardySep 2, 2025
How to troubleshoot no sound coming from Harman Kardon GO+PLAY Wireless Portable Speakers?
- H
  Henry PrinceSep 2, 2025
  If there is no sound coming from your Harman Kardon Go + Play unit, ensure the unit is receiving power. Check that the wall outlet or power strip has power, and that all switches for the outlet/power strip and the unit itself are turned on.
L
Lauren ThomasSep 4, 2025
Why is my Harman Kardon GO+PLAY Wireless Portable Speakers buzzing?
- S
  Scott DeanSep 5, 2025
  If your Harman Kardon Go + Play Wireless unit is emitting a loud hum or buzzing noise, first, check the Aux In cable connection. If the issue persists, the cable may be faulty and require replacement. As a last resort, turn the unit off and connect it to another wall outlet to resolve a potential ground loop issue.
C
Chris RileySep 7, 2025
How to fix distortion on Harman Kardon GO+PLAY Wireless?
- O
  omooreSep 7, 2025
  If you are experiencing distortion (static, crackling, or hissing sounds) with your Harman Kardon portable speakers, try the following: Test the unit with another source to rule out a problem with your original source device. Also, check the volume level of the source and turn it down if necessary. Finally, check the EQ setting on your iPhone/iPod or source device and adjust it if it is set too high.
W
Wayne VillarrealSep 9, 2025
Why does sound only come from one side of my Harman Kardon Portable Speakers?
- N
  Nicole SmithSep 9, 2025
  If the sound is only coming from one side or channel of your Harman Kardon portable speakers, make sure that the auxiliary cable is fully inserted into the jack.