Harman Kardon HD 990 - Front Panel Controls

5
HD 990
Front Panel Controls
1 Main Information Display: This display delivers messages and status indications
to help you operate the CD player.
2 Power On/Off (Standby): Press the button once to turn the CD player on, press
it again to put the unit in the Standby mode.
3 Open/Close: Press this button to open or close the disc tray.
4 Play: Press to initiate playback or to resume playback after Pause has been
pressed.
5 Pause: Press this button to momentarily pause playback. To resume playback,
press the button again. If a CD is playing, the sound will be muted.
6 Stop: Press this button to stop the disc currently being played or to exit program
mode (see page 11 for complete information).
7 Skip/Search (Previous): Press this button to move backward through the music
tracks on a CD disc. Keep the button pressed to search backward at one of the
available speeds.
8 Skip/Search (Next): Press to move forward through the music tracks on a CD.
Keep the button pressed to search forward at one of the available speeds.
9 Display Dimmer : Press this button to reduce the brightness of the Information
Display by 50% or to turn the display off completely in the following order: FULL
BRIGHTNESS  HALF BRIGHTNESS  OFF  FULL BRIGHTNESS.
Important Note : When the unit is turned off (to Standby), pressing the Play button
4 j on the front or on the remote will automatically turn on the player and start
playback.
1Main Information Display
2Power On/Off (Standby) and Status Mode Indicator
3Open/Close
4Play
5Pause
6Stop
7Skip/Search (Previous)
8Skip/Search (Next)
9Display Dimmer
HD 990 harman/kardon