14 REPEAT PLAY OPERATION
Repeat Play Operation
Repeat Play
The HD750’s programming system enables you
to repeat either a single track, the entire disc
(respectively all programmed tracks) or a special-
ly programmed passage that you select.
Repeat One Track
To repeat the track in play, press the Repeat
button
5
!
once. When the unit is in Stop
mode, press Repeat once, select the track to be
repeated with the Skip or Numeric buttons as
described on page 10, and press Play
4
9
.The REPEAT and 1 indicators will light and
the track will continue to play over and over
again continuously. If the track is changed by
pressing the Skip buttons
7
7
while the
Repeat function is in use, the newly selected
track will be repeated.To stop the repeat play,
press the Stop button
5
A
or press the
Repeat button
$
5
until the REPEAT indica-
tor goes out.
Repeat All Tracks
To repeat all of the tracks on a disc, press the
Repeat button
5
$
until the REPEAT and
ALL indicators light up. When you see these indi-
cators, the entire disc or all programmed tracks
will play through to the end, and then start
again from the beginning. The disc will play con-
tinually until the Stop button
5
A
is
pressed.
Repeat A–B
The HD750 may be programmed to repeat any
section within a track, or a complete passage or
program that includes material in a series of
tracks.
To program the unit for A–B play, first locate the
point on the disc where you wish to begin the
repeated section.At that point, press the Repeat
A–B button
6
.The REPEAT indicators will
light in the Information Display and an
A– indicator to show that the program process
has started. Let the disc continue to play or
press the Search
—
button
6
8
or Skip
fl·
button
7
7
on the front or remote
until you have reached the end of the section to
be repeated. When the end point is reached,
press the Repeat A–B button
6
again. Note
that the REPEAT and A–B indicators will now be
illuminated.
Once the Repeat A–B button
6
is pressed
for the second time to complete the program-
ming, the HD750 will automatically go to the
beginning of the selected passage and continue
to play the section over and over.
To resume normal play press the Repeat A–B
button
6
again.The REPEAT and A–B indica-
tors will go out, and the rest of the disc will play
normally.
IMPORTANT Note: Tracks programmed as
described before in chapter ”Programmed Play”
can be repeated too: When you press Repeat
!
6
once after a program is created (the
PROGRAM indicator must be lit, otherwise press
Program) and the program step indication
P-01is not lit (otherwise press Stop once),
the REPEAT 1 indicator will light and the track
currently selected or playing will be repeated
continuously. If Repeat is pressed twice REPEAT
ALL will be displayed, all programmed tracks will
be played subsequently and the sequence will be
repeated continuously until Stop is pressed.
To Next Page
Loading...
