Do you have a question about the Harman Kardon HK 3470 and is the answer not in the manual?
power requirement | AC 120V/60Hz |
---|---|
power consumption (idle) | 72W |
power consumption (maximum) | 332W |
stereo mode continuous average power | 100 Watts per channel, 20Hz–20kHz @ < 0.07% THD into 8 ohms, 135 Watts per channel, 20Hz–20kHz @ < 0.2% THD into 4 ohms |
---|---|
input sensitivity/impedance | 200mV/47kohms |
signal-to-noise ratio | 95dB |
frequency response | 10Hz–110kHz |
high instantaneous current capability (HCC) | ±45 Amps |
rise time | 16 µsec |
slew rate | 40V/µsec |
frequency range | 87.5–108MHz |
---|---|
usable sensitivity IHF | 1.12 µV/13.5dBf |
signal-to-noise ratio mono/stereo | 73/72dB |
distortion mono/stereo | 0.3/0.4% |
stereo separation | 40dB @ 1kHz |
selectivity | ±400kHz, 65dB |
image rejection | >80dB |
IF rejection | >100dB |
tuner output level | 500mV |
frequency range | 520–1710kHz |
---|---|
signal-to-noise ratio | >40dB |
usable sensitivity loop | 500µV/M |
distortion | 0.8% |
selectivity | ±10kHz, >25dB |
width | 17.4 inches (442mm) |
---|---|
height | 6.1 inches (156mm) |
depth | 16.3 inches (415mm) |
weight | 26.8 lb (12.1kg) |
Warnings about enclosure, grounding, installation, cleaning, and moving the unit.
Guidance on unpacking and FCC compliance information.
Connecting audio sources, speakers, and outputs.
Remote extension, amplifier setup, power, and speaker placement.
Core functions, power, and source selection.
Tuning, presets, auto-preset, and tape recording.
Explains remote control pages and button functions.
Steps to program the remote control for other devices.
How to reset remote buttons or the entire remote.
Details on power, sensitivity, and frequency response.
FM tuning performance metrics.
AM tuning performance metrics.
Power, dimensions, and weight.