What to do if there is no sound from Harman Kardon Stereo Receiver?
If your Harman Kardon Stereo Receiver isn't producing any sound, ensure that all input and speaker connections are securely connected. Check if the Mute button is activated. Increase the volume. Select the correct source. Activate Speaker 1 or Speaker 2. Finally, ensure headphones are unplugged.
General| Receiver type | stereo |
|---|---|
| Frequency range | 10 - 130000 Hz |
| Speaker selector | A+B |
| Audio output channels | - channels |
| Signal-to-Noise Ratio (SNR) | 100 dB |
| Total Harmonic Distortion (THD) | 0.07 % |
| Power output per channel (20-20KHz@8 Ohm) | 85 W |
| HDMI in | - |
| Audio (L/R) in | 5 |
| Ethernet LAN (RJ-45) ports | 1 |
| 12V trigger | Yes |
| Connectivity technology | Wired |
| Speakers connectivity type | RJ-45 |
| AM band range | 520 - 1710 kHz |
| FM band range | 87.5 - 108 MHz |
| Supported radio bands | AM, FM |
| Optical drive included | No |
| Product color | Black |
| AC input voltage | 220-240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | 310 W |
Weight and Dimensions| Depth | 300 mm |
|---|---|
| Width | 440 mm |
| Height | 121 mm |
| Weight | 6000 g |
To Next Page
