Do you have a question about the Harman Kardon HK3475 and is the answer not in the manual?
continuous average power (FTC) 8 ohms | 110 Watts per channel |
---|---|
continuous average power (FTC) 4 ohms | 140 Watts per channel |
input sensitivity/impedance | 200mV/47kohms |
signal-to-noise ratio (IHF-A) | 95dB |
frequency response @ 1W (+0dB, –3dB) | 10Hz–110kHz |
high instantaneous current capability (HCC) | ±45 Amps |
rise time | 16 µsec |
slew rate | 40V/µsec |
frequency range | 87.5–108MHz |
---|---|
usable sensitivity IHF | 1.12 µV/13.5dBf |
signal-to-noise ratio mono/stereo | 73/72dB |
distortion mono/stereo | 0.3/0.4% |
stereo separation | 40dB @ 1kHz |
selectivity | ±400kHz, 65dB |
image rejection | >80dB |
IF rejection | >100dB |
tuner output level | 500mV |
frequency range | 520–1710kHz |
---|---|
signal-to-noise ratio | >40dB |
usable sensitivity loop | 500µV/M |
distortion | 0.8% |
selectivity | ±10kHz, >25dB |
power requirement | AC 120V/60Hz |
---|---|
power consumption | 72W idle, 332W maximum |
width | 17.4 inches (442mm) |
height | 6.1 inches (156mm) |
depth | 16.3 inches (415mm) |
weight | 26.8 lb (12.1kg) |