Harman Kardon HK6250 - Specifications; Continuous Average Power; HCC and Power Bandwidth; Frequency Response and Damping Factor

Congratulations on your purchase of the Harman
Kardon HK6250/HK6150 Integrated Amplifier.
In order to appreciate the full performance of this
sophisticated unit, please be sure to read this in-
struction manual and use your integrated amplifier
only in accordance with its instructions. Keep it in
a safe place for future reference.
Continuous Average Power
(FTC)
(both channels
driven, 20-20,000Hz)
HK6150 : 30 Watts per channel
@ less than 0.09% THD into
8 Ohms
HK6250 :33 Watts per channel
@ less than 0.09% THD into
8 Ohms,
45 Watts per channel
@ less than 0.3% THD into
4 Ohms
HCC (High-instantaneous
Current Capability)
HK6150 :+22 Amps
HK6250 :+30 Amps
Power Bandwidth (at half
rated output, 8 Ohms)
:<10Hz to 100,000Hz
Frequency Response (at :0.5Hz to 150,000Hz
1Watt output, +0, -3dB)
Damping Factor :60
Signal-to-Noise Ratio (ref.
rated power output, A-wtd)
Phono (MM) :80dB
Tuner, CD, Video :98dB
Input Sensitivity/Impedance
Phono (MM) :2.2mV/47k Ohms, 125pF
Tuner, CD, Video »135mV/22k Ohms
Phono Overload (MM) >110mV
Tone Control Characteristics
Bass Boost/Cut
(at 50Hz)
Treble Boost/Cut
(at 10kHz)
Dimensions (W x H x D)
:+10dB/-10dB
:+10dB/-10dB
:443 x 103 x 361 mm
(17-1/2"x 4”x14-1/4")
Weight
HK6150 :6.4kg (14. 1lbs)
HK6250 :7.0kg (15.4 Ibs)
Power Supply : AC230V/240V, 50/60Hz
Power Consumption
HK6150 > 150W
HK6250 : 165W
All
specitications
and
features
subject
to
change
without
notice.
SPECIFICATIONS
FOR CUSTOMERS IN THE UK
Your unit is supplied with the flex which will have either two or three
aes so the following items should be observed to guarantee
safety:
THREE CORE FLEX
WARNING: THIS APPARATUS MUST BE EARTHED.
IMPORTANT. The wires in this mains lead are coloured in accor-
dance with the following code:
Green-and-yellow : Earth
Blue : Neutral
Brown : Live
As the colours of the wires in the mains lead of this apparatus may
not correspond with the coloured markings identifying the terminals
in your plug, proceed as follows:
The wire which is coloured green-and-yellow must be connected to
the terminal in the plug which is marked by the letter E or by the safety
earth symbol ¥ or coloured green or green-and-yellow.
The wire which is coloured blue must be connected to the terminal
which is marked with the letter N or coloured black.
The wire which is coloured brown must be connected to the terminal
which is marked with the letter L or coloured red.
TWO CORE FLEX
IMPORTANT. The wires in this mains lead are coloured in accor-
dance with the following code:
Blue: Neutral
Brown : Live
As the colours of the wires in the mains lead of this apparatus may
not correspond with the coloured markings identifying the terminals
in your plug, proceed as follows:
The wire which is coloured blue must be connected to the terminal
which is marked with the letter N or coloured black.
The wire which is coloured brown must be connected to the terminal
which is marked with the letter L or coloured red.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK,
DO
NOT
EXPOSE
THIS
APPLIANCE
TO
RAIN
OR
MOISTURE.