Harman Kardon HK6850 - Specifications

Specifications HK6950R HK6850
Continuous Average Power (FTC) per Channel 20Hz — 20kHz,
Both Channels Driven
8 ohms: 170 Watts @ < 0.08% THD 120 Watts @ <0.08% THD
4 ohms: 170 Watts @ < 0.08% THD 120 Watts @ <0.08% THD
HCC (High instantaneous Current Capability): +90 Amps +70 Amps
Negative Feedback (overall): 12dB 12dB
Power Bandwidth, at half rated output, 8 ohms:
<10Hz - 100kHz
<10Hz - 100kHz
Frequency Response at 1 Watt output, +0/-3dB:
0.2Hz - 180kHz
0.2Hz - 180kHz
Slew Rate: 280 Volts/usec 280 Volts/usec
Square Wave Rise Time: 1.8usec 1.8usec
Transient Intermodulation Distortion (TIM): Unmeasurable Unmeasurable
Damping Factor: 70 70
Signal-to-Noise Ratio (ref rated power output, A-Wtd)
Phono (MM): 83dB 83dB
Phono (MC): 76dB 76dB
Video/CD: 95dB 95dB
Main In: 108dB 108dB
Input Sensitivity/Impedance
Phono (MM):
Phono (MC):
Video/CD:
Main In:
Phono Overload (MM/MC):
RIAA Equalization 20Hz — 20kHz:
Tone Control Range, Bass (50Hz)/Treble (10kHz):
Phase Shift (400Hz - 20kHz):
Subsonic Filter:
Phase Correct Loudness Contour at 50Hz:
Weight (Ibs/kgs):
Dimensions (Width x Height x Depth):
Power Supply:
Power Consumption:
All specifications and features subject to change without notice.
© 1991 Harman Kardon, Inc.
2.5mV/47k Ohms, 125 pF
2.5mV/47k Ohms, 125 pF
1201V/56 Ohms 1204 V/56 Ohms
135mV/22k Ohms 135mV/22k Ohms
880mV/27k Ohms 880mV/27k Ohms
150mV/7mV 150mV/7mV
+0.2dB +0.2dB
+10dB/+10dB +10dB/+10dB
<5° <5°
15Hz, 6dB/octave 15Hz, 6dB/octave
+6dB +6dB
37.5lbs/17.0kg 34.21bs/15.5kg
17-318" x 6-5/16” x 15-15/16” 17-3/8” x 6-5/16” x 15-15/16”
443 x 160 x 405 mm 443 x 160 x 405 mm
AC 120V, 60Hz AC 120V, 60Hz
350W, 500VA 280W
10