Need help?Do you have a question about the Harman Kardon HKTS 10 and is the answer not in the manual?
Frequency| frequency response | 35Hz – 20kHz (–6dB) |
|---|
SAT-TS10 Satellites| recommended power | 10 – 110 watts |
|---|---|
| impedance | 8 ohms nominal |
| sensitivity | 86dB @ 1 watt/1 meter |
| tweeter | One 1" dome, video-shielded |
| midrange | One 4" driver, video-shielded |
| dimensions | 257mm x 133mm x 137mm |
| weight | 6.6 lb/3.0kg |
CEN-TS10 Center| recommended power | 10 – 110 watts |
|---|---|
| impedance | 8 ohms nominal |
| sensitivity | 86dB @ 1 watt/1 meter |
| tweeter | One 1" dome, video-shielded |
| midrange | Dual 4" drivers, video-shielded |
| dimensions | 128mm x 418mm x 131mm |
| weight | 10 lb/4.5kg |
SUB-TS10 Subwoofer| amplifier | 150 watts RMS |
|---|---|
| bass | 12" woofer, bass-reflex enclosure |
| dimensions | 515mm x 416mm x 382mm |
| weight | 40 lb/18.0kg |
Comprehensive safety instructions for operating the speaker system, covering electrical, usage, and environmental hazards.
Details the HKTS 10 system's components, design, and key features for home theater use.
Lists all the components and accessories included with the HKTS 10 home theater speaker system.
Explains how to connect speakers using speaker-level inputs and outputs for amplifier connection.
Details connecting the subwoofer using line-level inputs for Dolby Digital/DTS or general line-level audio.
Guidance on positioning front satellite speakers for optimal listening experience.
Instructions for placing the center channel speaker relative to front speakers and screen.
Recommendations for locating the subwoofer for best bass reproduction in the room.
Tips for positioning surround speakers to create an immersive ambient sound.
Details how to place satellite speakers on shelves or mount them securely to walls.
Instructions for attaching the adjustable support cradle to the center speaker.
Provides essential tips on connecting speaker wires, ensuring correct polarity and wire preparation.
Guides connection for digital surround sound systems using SUB/LFE input and processor settings.
Explains line-level connection for Dolby Pro Logic systems with a subwoofer output or preamp output.
Details speaker-level connection for Dolby Pro Logic without a subwoofer output, using high-level inputs/outputs.
Explains how to turn the subwoofer on, its standby modes, and automatic power features.
Guides on adjusting subwoofer volume, phase, and high-cut filter for optimal sound.
Resolves issues related to no sound from speakers, including checks for connections, settings, and components.
Addresses problems with system volume dropping or low/no bass output from the subwoofer.
Helps diagnose and fix problems with surround sound speaker output and configuration.
Technical details for the complete HKTS 10 system, including frequency response.
Technical details for the satellite and center channel speakers, including power, impedance, and dimensions.
Technical details for the SUB-TS10 subwoofer, including amplifier power, driver size, and dimensions.
To Next Page
