Harman Kardon HKTS 200 SUB - Connecting to a Trigger Voltage Source

LEFT
LFE SUB
OUTPUT
TRIGGER
OUT
+– +–
+ –
+–
+ –
+–
+ –
RIGHT
SURROUNDFRONT CENTER
PL0004-01001
Subwoofer
Receiver
Trigger Cable
(Black Ends)
Connecting to a Trigger Voltage Source
If your preamp/processor or another audio/video component has a trigger
voltage connection that supplies between 3 and 30V (AC or DC), connect
it to the HKTS200SUB’s External Trigger Input Connector . If the
component’s trigger voltage connection has a 3.5mm mini jack you can
use the supplied combination LFE/trigger cable to make the connection.
NOTE: Please do not connect the subwoofer ON/OFF trigger cable to the
Remote Control Output (IR Out) of your home cinema system or surround
receiver. This could lead to malfunction.
5
HKTS200SUB harman/kardon
8