2
Introduction
Thank you for purchasing the Harman Kardon
®
HKTS 30SAT-2 speaker
pair, with which you’re about to begin many years of listening
enjoyment. While state-of-the-art speaker components are hard at work
within the HKTS 30SAT-2, hookup is simple. Color-coded cables make the
HKTS 30SAT-2 easy to use.
To obtain maximum enjoyment from your new speaker system, we urge
you to take a few minutes to read through this manual. It will help ensure
that the connections you make to your receiver or amplifier are correct.
If you have any questions about this product, its installation or its
operation, please contact your dealer, the best local source of information.
Description and Features
The HKTS 30SAT-2 is a pair of speakers, each of which features:
• Dual 3" (75mm) video-shielded midrange drivers
• One 3/4" (19mm) video-shielded dome tweeter
• A sealed enclosure
• A built-in, removable base
• A wall-mount bracket
• Color-coded connecting cables
The speaker cables use a color-coding system to conform to the
Consumer Electronics Association (CEA
®
) standard. This color-coding sys-
tem minimizes confusion when you connect the speakers, especially when
you are connecting them to a Harman Kardon receiver.
Optional HTFS 3/E floor stands are available separately from your
Harman Kardon dealer.
Included
Two HKTS 30SAT-2 satellite speakers
Harman Kardon
®
HKTS 30SAT-2
Two wall-mount brackets
Two metal stop plates and screws
Two 10-meter (32.8-foot) speaker cables
(brown and tan color bands)
To Next Page
Loading...
