Harman Kardon HS 200 - Connecting VCR and Sat Decoder (method 5 and 6); Connecting Set-top Box or Digital Satellite Receiver (method 7) - using coaxial digital cable; Digital In- and Outputs; Speaker Placement

harman/kardon
HS200 Component List
Item P/N Description Specification Qty Location.No. Note
24 0100SJHS200E009 plastic part HS200-Large Lens 1 HS200-RE10
3mm Black
Lens (Include
"HS200" and
47mm
“harman/kardon
” Logo)
25 0100SJHS100E010 plastic part HS100Volume Button 1 HS100-RE10
26 0100SJHS100E008 plastic part HS100volume button lampshade 1 HS100-RE08
27 0100SJ1000AE016 plastic part 1000A-IR receiver support 5.5mm 1
28 01.00.SJ.QT.E019 VFD filter 124.5*33.5*0.5mm 1
29 01.40.CON.DCZ.E178 AC power Jack WS-044-0 1
30 01.00.SB.E036 Metal logo 100mm "Harman/Kardon" Thin Logo 1
31 01.00.DP.JY.E135
Dustproof for Disc tray door of
Loder
LTD-1510 1 Black
32 01.00.DP.XJ.E192 Silica gel gasket
50.6*4.2*1.5mm (with #500 glue be single
sides glued )
4
For pedestal underlay
HS100-H01
33 01.00.DP.HM.E359 sponge
20*10*7MM (with #9448 glue be double
sides glued )
2 For VFD(2)
34 01.00.FZ.QT.153 Astigmatism PVC Φ45.5*Φ9.5mm 1
Between volume button
and Front Panel Board
35 01.00.FZ.QT.E253 Mask PVC φ
38.5 (Underside Glued) 1 Inside the volume button Black PVC
36 01.00.DP.HM.E364 sponge 10*10*7MM (with double sides glued) 1 For IR receiver
37 01.00.DP.HM.E160 sponge 20*10*4.5mm (with Single side glued) 1
Between AV Board and
Heatsink
Black
38 01.00.DP.HM.E363 High Soft sponge 124*12*2MM (with Single side glued) 1
paste in front of Disc
tray door in the front
panel
Black
39 01.00.DD.PM.E183 electric sponge 12*10*18mm 1
pasted under U403 of
AV Board
40 01.00.DD.PM.E271 electric sponge 20*20*10MM 1
Between front panel
PCB and plastic part
41 01.00.FZ.QT.E122 Plastic fastener 12CM 3
42 01.00.DP.QT.E113 Sil-pad sil-pad 400-3022 1
For Q509 on SMPS
Board
HS200 /230