Harman Kardon HS 200 - Installation and Connections; Connecting the AC Power; First Turn On; Basic Play

harman/kardon
HS200 Component List
Item P/N Description Specification Qty Location.No. Note
43 01.00.DP.JY.E112
Diathermanous Selenium
Rubber
16*11*1mm 3 For AV Board
44 01.00.DP.JY.E247 Insulated PVC HS200-H01 1 For SMPS Board
45 01.00.DP.JY.E249 Insulated PVC HS200-H02 1
Be buckled above
volume button board
46 01.00.DP.JY.E541 Insulated PVC 22.5*10*0.3mm (with Single side glued) 2
For hamulus of front
panel
47 01.00.DP.HM.E369 sponge 15*15*24mm (with Single side glued) 1
For frequency
modulation module and
AV Board
48 01.00.DP.HM.E370 sponge 15*15*7mm (with Single side glued) 1
For frequency
modulation module and
Main Board
49 01.00.DP.HM.E115 sponge 10*10*1.5mm 1
For hamulus of front
panel
50 01.00.DP.XJ.E560
Diathermanous Silica gel
gasket
20*15*4MM 2
Between AV Board and
chassis under U403
51 01.00.WJ.JG.E265 Screw 3*8PWBTTC 2
For AV Board and
Heatsink (2)
52 01.00.WJ.JG.E328 Screw 3*6KBTTO 5
For front Panel and
Left/Right sides of
chassis (4), Between
two Heatsinks on SMPS
Board(1)
53 01.00.WJ.JG.E543 Screw 3*6PWBTTNI 9
For pedestal underlay
and chissis (9)
54 01.00.WJ.JG.E235 Screw 3*8PWBTTNI 3
For front panel and
pedestal underlay and
chissis(3)
55 01.00.WJ.JG.E655 Screw 1.7*4CAHNI D=3.2 Free-Lead 1
For Button cover Board
and button Board
HS200 /230