Harman Kardon TC300 - Power Connections; TC600 12 V Positive (B+) Connection

Power connections TC600 The TC600 requires two individual wires
Your
TC Series amplifier requires a positive 12V Positive (B+) connection
connected to the two battery (+) terminals
12V battery connection and a negative 12V Remember-: Connecting your. amplifier to
on the amplifier. Make sure you route these
ground. Use 10-gauge or larger wire for
the positi,te terminal of your battery is the leads separately from the preamp output
these connections.
last thing you do, afrer all other- connections
cables to avoid the possibility of noise in
in your system have been conzpleted.
the system. There are two methods you can
use to complete this connection:
er connections
I
SIGNAL INPUT SPEAKER OUTPUT