Harman Kardon TD4400 - Specifications

SPECIFICATIONS
Tape Speed:
Heads:
Record/Play Head Type:
Frequency Response, -20dB (IHF sid):
Typical Large Signal Response (0dB):
Wow-and-Flutter
NAB, WRMS:
DIN:
Signal-to-Noise Ratio (Type |I Tape)
Dolby off:
Dolby B on:
Dolby C on:
Total Harmonic Distortion
1kHz, Metal tape, Dolby ‘evel:
Channel Separation:
Channel Crosstalk:
Erase Ratio:
Bias Frequency:
Fast Forward and Rewind Time:
Peak Reading Meter Range:
Output Level, OdB, 10k Ohm load:
Input Sensitivity (0dB) Line:
Input Impedance Line:
Dimensions (w x h xd):
Weight:
TD4400
4.75cm/sec (1-7/8"/sec)
2
Isotropic
20Hz-20kHz +3dB
all formulations
20Hz-20kHz +3dB
w/Dolby C & metal tape
0.045%
0.07%
57dB
65dB
73dB
1.0%
45dB
70dB
60dB
105kHz
90 sec (C-60)
-35dB to +8dB
640mV
45mV
22k Ohms
442 mm x 126 mm x 320 mm
(17-3/8" x 5" x 12-5/8")
5.4kg (11.9 Ibs)
All features and specifications are subject to change without notice.
TD4200
4.75cm/sec (1-7/8"/sec)
2
Hard Permailoy
20Hz-20kHz +3dB
w/metal tape
20Hz-18kHz +3dB
w/Dolby C & metal tape
0.05%
0.08%
57dB
65dB
73dB
1.0%
45dB
70dB
60dB
105kHz
90 sec (C-60)
-35dB to +8dB
640mV
45mV
22k Ohms
442 mm x 126 mm x 320 mm
(17-3/8" x 5" x 12-5/8")
5.4kg (11.9 Ibs)