EasyManua.ls Logo

Harman DigiTech FREQOUT User Manual

Harman DigiTech FREQOUT
9 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Owner’s Manual
Question and Answer IconNeed help?

Do you have a question about the Harman DigiTech FREQOUT and is the answer not in the manual?

Harman DigiTech FREQOUT Specifications

General IconGeneral
BrandHarman
ModelDigiTech FREQOUT
CategoryMusic Pedal
LanguageEnglish

Summary

Warranty and Technical Support

Technical Support and Service Procedures

Provides contact information and procedures for technical assistance and product returns.

Introduction to DigiTech FreqOut

Key Features Overview

Lists the key features and capabilities of the DigiTech FreqOut pedal.

User Interface Elements

Power Connector

Connects the recommended power adapter for operation. Battery power is not available.

Feedback LEDs

Middle LED shows effect is on; others show onset rate.

Output Jack

Connects to an amp or the next pedal on your pedalboard.

Effect Footswitch

Turns the effect on or off, works as latching or momentary.

Momentary Switch Functionality

Determines footswitch operation (latching or momentary).

Gain and Onset Control Knobs

Adjusts feedback gain and time for feedback to grow to full strength.

Type Knob for Harmonic Selection

Selects one of seven feedback types (SUB, 1ST, 2ND, 3RD, 5TH, NAT LOW, NAT HIGH).

Dry Signal Switch

Turns the dry signal on or off while the effect is enabled.

Input Jack for Instrument

Connect your instrument to this jack.

Using Harmonic Types for Feedback

Feedback Type Explanations and Tips

Details on Harmonic and Natural feedback types, including tips for achieving specific sounds.

Connecting and Powering the Pedal

Connection Diagram and Setup

Visual guide showing how to connect the FreqOut pedal to a guitar and amplifier.

Product Specifications

Electronic Controls and Conversion Specs

Details on controls, signal-to-noise ratio, THD, and A/D/A conversion.

Input and Output Specifications

Specifies input/output types, max levels, and impedance.

Physical Dimensions and Weight

Lists dimensions and weight of the pedal.

Power Consumption and Requirements

Details power consumption and requirements for the pedal.

Recommended Power Adapter Details

Information on the recommended power adapter model, polarity, and output.