Harman JBL BAR 2.0 ALL-IN-ONE MK2 - Sound Settings; Audio Sync Adjustment; Smart Mode Configuration; Restore Factory Settings

www.jbl.com
English
1111
7 SOUND SETTINGS
Audio sync
With the audio sync function, you can synchronize audio and
video to make sure that no delay is heard from your video content.
1. On the remote control, press and hold TV.
→ Ready for audio sync: The status indicator scrolls white.
2. Within ve seconds, press + or - on the remote control to
adjust the audio delay and match with video.
→ The status indicator scrolls to show the change range.
Smart mode
With the smart mode enabled by default, you can enjoy TV
programs with rich sound effects. For TV programs such as
news and weather forecasts, you can reduce sound effects by
disabling the smart mode and switching to the standard mode.
Smart mode: EQ settings and JBL Surround Sound are applied
for rich sound effects.
Standard mode: The preset EQ settings are applied for standard
sound effects.
To disable the smart mode, do the following:
• On the remote control, press and hold until the status
indicator scrolls white. Press +.
→ When the smart mode is disabled, the status indicator
scrolls white twice.
→ Next time you switch on the soundbar, the smart mode is
enabled again automatically.
8 RESTORE FACTORY SETTINGS
By restoring the default settings dened at factories, you remove
all your personalized settings from the soundbar.
• On the soundbar, press and hold and for more than 10
seconds.