Harman JBL CINEMA SB170 - Re-connect the Subwoofer; Product Specifications

www.jbl.com
English
1313
10 RE-CONNECT THE SUBWOOFER
The soundbar and subwoofer are paired at factories. After power-
on, they are paired and connected automatically. In some special
cases, you may need to pair them again.
2 1
AC~
AC~
C~ AIR C~ AIR
To re-enter the subwoofer pairing mode
1. On the subwoofer, press and hold until the connection
status indicator turns fast ashing amber ( ).
2. On the soundbar, press to switch on.
→ The subwoofer is connected to the soundbar automatically.
Connected: The connection status indicator turns solid
amber ( ).
NOTES:
− If the wireless connection fails again, check if there is a conflict or
strong interference (e.g. interference from an electronic device) around
the location. Remove these conflicts or strong interferences and
repeat the above procedures.
11 PRODUCT SPECIFICATIONS
General specication:
• Power supply: 100 - 240 V~, 50/60 Hz
• Total speaker power output (Max. @THD 1%): 220 W
• Soundbar power output (Max. @THD 1%): 2 x 52 W
• Subwoofer power output (Max. @THD 1%): 116 W
• Soundbar transducer: 2x (48 x 90) mm racetrack driver +
2x 0.5” tweeter
• Subwoofer transducer: 5.25”, wireless sub
• Standby consumption: 0.5 W
• Operating temperature: 0°C - 45°C
HDMI specication:
• HDMI Video output (With Audio return channel): 1
• HDMI HDCP version: 1.4
Audio specication:
• Frequency response: 40 Hz - 20 kHz
• Max SPL: 82 dB
• Audio inputs: 1 Optical, Bluetooth, USB (USB playback is
available in US version. For other versions, USB is for Service
only.)
USB specication:
• USB port: Type A
• USB rating: 5 V DC / 0.5 A
• Supporting le format: mp3
• MP3 Codec: MPEG 1 Layer 1/2/3, MPEG 2/2.5 Layer 1/2/3
• MP3 sampling rate: 8 kHz - 48 kHz
• MP3 bitrate:
MPEG 1 Layer 1: 32 kbps - 448 kbps;
MPEG 1 Layer 2: 32 kbps - 384 kbps;
MPEG 1 Layer 3: 32 kbps - 320 kbps;
MPEG 2/2.5 Layer 1: 32 kbps - 256 kbps;
MPEG 2/2.5 Layer 2/3: 8 kbps - 160 kbps
Wireless specication:
• Bluetooth version: 4.2
• Bluetooth prole: A2DP V1.3, AVRCP V1.5
• Bluetooth frequency range: 2402 – 2480 MHz
• Bluetooth Max. transmitting power: <0dBm (EIRP)
• Bluetooth modulation: GFSK, π/4 DQPSK
• 2.4G wireless frequency range: 2400 – 2483.5 MHz
• 2.4G Max. transmitting power: 3 dBm
• 2.4G wireless modulation: FSK
Dimensions:
• Dimensions (W x H x D):
900 x 62 x 67 mm / 35.4” x 2.44” x 2.64” (soundbar);
200 x 320 x 280 mm / 7.87” x 12.6” x 11” (subwoofer)
• Weight: 1.7 kg (soundbar); 4.2 kg (subwoofer)
• Packaging dimensions (W x H x D):
995 x 235 x 405 mm / 39.17” x 9.25” x 15.94”
• Packaging weight (Gross weight): 8.0 kg