1.3- Mounting VL18-SUB with two monitoring boxes:
1)
When mounting with two
monitor boxes and one VL18-
SUB, you should be careful to
place your VL18-SUB and the
pedestals of the monitor boxes
on a flat place to prevent
tipping;
2)
Never mount your VL18-
SUB in a humid or beaten-
ground floor;
3)
For this type of mounting
it is advisable to use JBL line
products (JS, EON, PRX ...);
4)
The pedestal does not
come with the VL18-SUB, you
should purchase it separately.
5)
Do not expose this product to rain and moisture, this type of exposure could damage your VL18-SUB. This
type of damage is not covered by the warranty.
1.4- Mounting VL18-SUB with LINE ARRAY:
1)
When mounting the VL18-SUB jointly with LINE VL6A or VL8A, care must
be taken in the installation. The installation and care notes with the LINE VL6A
and VL8A system are in the respective manual. For installation of the VL18-
SUB, you should place it on a flat location to prevent tipping;
2)
Never mount your VL18-SUB in a humid or beaten-ground floor;
3)
For this type of mounting it is advisable to use JBL line products (VL6-A
AND VL8A);
4)
You should always respect the maximum stacking recommended
in this manual;
5)
Do not expose this product to rain and moisture, this type of exposure
could damage your VL18-SUB. This type of damage is not covered by the
warranty.
To Next Page
Loading...
Need help?
General