7
Connections
SB 16
Connections
Source Connections
Analog: Use the supplied stereo audio cable to connect the soundbar’s Source 1 (analog)
input to your TV’s stereo audio output. If your TV has two sets of audio output jacks, use
the set that has a fixed (not variable) output level. This will let you turn your TV’s speakers
all the way off while the TV still supplies a constant audio signal to the soundbar.
Digital: If your DVD player, cable tuner or satellite tuner have coaxial or optical digital
outputs, you can use the supplied optical digital audio cable and a coaxial digital audio
cable (not supplied) to connect them to the soundbar’s Optical and Coaxial digital inputs.
NOTE: If your DVD player, cable tuner or satellite tuner does not have a coaxial digital
output, you can connect its analog audio output to your TV. The TV will send its audio
signal to the soundbar through the analog connection described above.
AUDIO
OUT
OPTICAL
DIGITAL
OUT
COAXIAL
DIGITAL
OUT
TV
Stereo Audio Cable
(supplied)
Coaxial Digital
Audio Cable
(not supplied)
Optical Digital
Audio Cable
(supplied)
DVD Player
SB 16 CTR Soundbar
Satellite Tuner
To Next Page
Loading...
