8
Dry Seasoned Wood Only!
TL2.6 Woodburning Stove
Save These Instructions3-90-08570
FIRE RISK.
HEARTH & HOME TECHNOLOGIES
DISCLAIMS ANY RESPONSIBILITY
FOR, AND THE WARRANTY WILL
BE VOIDED BY, THE FOLLOWING
ACTIONS:
INSTALLATION AND USE OF ANY DAMAGED
APPLIANCE.
MODIFICATION OF THE APPLIANCE.
INSTALLATION OTHER THAN AS INSTRUCTED BY
HEARTH & HOME TECHNOLOGIES.
INSTALLATION OF PARTS OR COMPONENTS NOT
SUPPLIED OR APPROVED BY HEARTH & HOME
TECHNOLOGIES.
OPERATING APPLIANCE WITHOUT THE LEGS
ATTACHED.
OPERATING APPLIANCE WITHOUT FULLY
ASSEMBLING ALL COMPONENTS.
DO NOT OVERFIRE.
OR ANY SUCH ACTION THAT MAY CAUSE A FIRE
E. Pre- Use Check List
1. Place the appliance in a location near the
nal installation and follow the procedures
below:
2. Open the appliance and remove all articles
packed inside. Inspect all items for shipping
damage. Notify dealer of any missing or
damaged goods.
3. All safety warnings have been read and
followed precisely.
4. This Owner's Manual has been read in it's
entirety.
5. Floor protection requirements have been
read and followed.
6. The ue connector has been installed in
accordance with the instructions herein.
7. The proper clearances from the appliance
and chimney connector to combustibles
have been met.
8. The masonry chimney has been cleaned
and inspected by a professional, or the
factory built metal chimney is installed
according to the manufacturers instructions.
9. The chimney meets the minimum height
requirements.
10. All labels and hang tags have been removed
from the glass.
11. All plated surfaces have been wiped clean,
if applicable.
12. The optional air distribution blower
has been installed properly.
13. A properly grounded electrical receptacle is
available within reach of the blower's power
cord (if installed).
WARNING
INSPECT APPLIANCE AND COMPONENTS
FOR DAMAGE. DAMAGED PARTS MAY
IMPAIR SAFE OPERATION.
DO NOT INSTALL DAMAGED
COMPONENTS.
DO NOT INSTALL INCOMPLETE
COMPONENTS.
DO NOT INSTALL SUBSTITUTE
COMPONENTS.
REPORT DAMAGED PARTS TO DEALER.
WARNING
To Next Page
Loading...
