Harman VP3 ROW User Manual

184 Uconnect™ ACCESS USER’S MANUAL
To complete the pairing process, you will need to refer-
ence your mobile phone Owner’s Manual. The
Uconnect™ website may also provide detailed instruc-
tions for pairing.
NOTE:
• You must have Bluetooth ® enabled on your phone to
complete this procedure.
• The vehicle must be in PARK.
1. Press the “Phone” soft-key on the screen to begin.
2. If there is no phone currently connected with the
system, a pop-up will appear.
3. Select Yes to begin the pairing process. Then, search
for available devices on your Bluetooth ® enabled
mobile phone. When prompted on the phone, enter
the name and PIN shown on the Uconnect Touch™
screen.
• If No is selected, touch the “Settings” soft-key from
the Uconnect™ Phone main screen,
• Touch the “Add Device” soft-key,
• Search for available devices on your Bluetooth ®
enabled mobile phone. When prompted on the
phone, enter the name and PIN shown on the
Uconnect Touch™ screen,
• See Step 4 to complete the process.
4. Uconnect™ Phone will display an in progress screen
while the system is connecting.
5. When the pairing process has successfully completed,
the system will prompt you to choose whether or not
this is your favorite phone. Selecting Yes will make
this phone the highest priority. This phone will take
precedence over other paired phones within range.

Harman VP3 ROW Specifications

General

Brand	Harman
Model	VP3 ROW
Category	Car Receiver
Language	English