Harman VP3 ROW User Manual

44 Uconnect™ ACCESS USER’S MANUAL
Up function, if the radio reaches the starting station after
passing through the entire band two times, the radio will
stop at the station where it began.
Fast Seek Up
Touch and hold the Seek Up soft-key to advance the radio
through the available stations or channels at a faster rate,
the radio stops at the next available station or channel
when the soft-key is released.
Seek Down
Touch and release the Seek Down soft-key to tune the
radio to the next listenable station or channel. During a
Seek Down function, if the radio reaches the starting
station after passing through the entire band two times,
the radio will stop at the station where it began.
Fast Seek Down
Touch and hold the Seek Down soft-key to advance the
radio through the available stations or channel at a faster
rate, the radio stops at the next available station or
channel when the soft-key is released.
Direct Tune
Press the Tune soft-key located at the bottom of the radio
screen. The Direct Tune soft-key screen is available in
AM, FM, and SAT radio modes and can be used to direct
tune the radio to a desired station or channel.
Press the available number soft-key to begin selecting a
desired station. Once a number has been entered, any
numbers that are no longer possible (stations that cannot
be reached) will become deactivated / grayed out.
Undo
You can backspace an entry by touching the bottom left
Undo soft key.
GO

Harman VP3 ROW Specifications

General

Brand	Harman
Model	VP3 ROW
Category	Car Receiver
Language	English