with
a
Satellite receiver.
In
order
to
receive satellite
radio,
the vehicle needs to be
outside
with a clear view to the
sky.
If the
screen shows Acquiring Signal,
you
might
have to
change
the
vehicle’s position
in
order
to
receive
a signal.
In
most cases,
the
satellite radio does
not
receive
a signal
in
underground parking garages
or tunnels.
Audio
1. Press the
AUDIO button
at the
button
of the radio.
2.
The Audio Menu shows
the
following options
for you
to
customize
your audio settings.
Mid, Bass, Fade, Balance
•
Select the desired setting to adjust, then touch the
Enter/Browse button. Turn the Tune/Scroll knob to
adjust
the
setting
+ or - 9.
Press
the back
button
when
done.
1.
Press
the
Menu button
at the
bottom
of the
radio,
next
1
select the Time Format setting and then select Set
Time.
2. Adjust the hours or minutes by turning the
T
une/
Scroll knob, then pressing
the Enter/Browse
button
to
move
to
the next entry. You can also select 12hr
or 24hr
format
by
turning
the Tune/Scroll
knob, then
pressing
the Enter/Browse
button
on the
desired
selection.
3.
Once
the
time
is set
press
the
“Back” button
to
exit
the
time screen.
Media Mode
Media Mode is entered by touching the Media button
located
on the side of the
display.
Once in
Media
Mode,
select your media Source by rotating the Scroll rotary
knob and
pushing
the Enter button.
Common Media Functions
To Next Page
Loading...
Need help?
General
