What to do if Harmar Mobility PINNACLE SL300 have been stopped off the charge station?
If your Harmar Mobility Stairlift has been stopped away from its charging station, move it to a charge strip station. These are typically located at either end of the rail.
General| Rail Length | Customizable to fit staircase |
|---|---|
| Maximum Incline | 45 degrees |
| Drive System | Rack and pinion |
| Seat Depth | 16 inches |
| Safety Belt | Yes |
| Power Source | Battery |
| Safety Features | Seat belt, swivel seat, obstruction sensors |
| Track Type | Aluminum |
| Seat Type | Padded |
| Footrest | Folding |
Explains safety alert symbols and their meanings.
Technician assesses surrounding conditions for installation/servicing.
Identifies the product and its intended purpose.
Emphasizes reading manual for proper installation and maintenance.
Advises owner to fill out warranty form within 10 days.
Directs user to website for specs and notes code compliance responsibility.
Lists necessary tools for stairlift installation.
Lists parts included in the package and box contents.
Guides on measuring stairs for correct rail length.
Specifies electrical requirements for the lift installation.
Step-by-step guide for installing the stairlift rail.
Specific installation method for zero overrun scenarios.
Instructions for mounting the stairlift chassis onto the rail.
Completing the rail installation with rack and charging strips.
Steps for installing the footrest and seat components.
Procedure to switch armrest controls from right to left.
Steps to re-program the wireless call/send controls.
Verifies the functionality of the armrest control switch.
Instructions for securely tightening rail bracket mounting screws.
Adjusts the lift's travel limits for safe operation.
Verifies the operation of all safety stop switches.
Performs final checks on lift operation and safety features.
Specific procedures for installing a folding stairlift rail.
Lists major faults identified by beep codes.
Lists minor faults indicated by single long beeps.
Checks safety sensors for proper operation when lift fails.
Procedure for manually moving the lift in case of failure.
To Next Page
