Harmar Mobility Vantage SL400 User Manual

ATTENTION! STRICT ADHERENCE TO THESE INSTALLATION INSTRUCTIONS is required and will promote the safety of those installing this
product, as well as those who will ultimately use the lift for its intended purpose. Any deviation from these instructions will void the
LIMITED WARRANTY that accompanies the product. Additionally, any party installing the product who deviates from the INSTALLATION
INSTRUCTIONS shall be taken to agree to INDEMNIFY, SAVE AND HOLD HARMLESS the manufacturer from any and all loss, liability or
damage, including attorneys fees, that might arise out of or in connection with such deviation.
Stair Lift
SL400
INSTALLATION AND SERVICE MANUAL
TEC0017 23Jan2015 P/N: 630-00027-01 revC
© 2015Harmar Mobility, LLC • All Rights Reserved

Harmar Mobility Vantage SL400 Specifications

General

Brand	Harmar Mobility
Model	Vantage SL400
Category	Stairlifts
Language	English

Summary

INSTALLATION AND APPLICATION RESTRICTIONS

Stair Lift Restrictions

Covers incline, rail length, load capacity, electrical, and ASME regulations.

GEAR RACK ADJUSTMENT

Gear Rack Spacing and Alignment

Adjusting gear rack spacing and alignment for proper function.

GEAR RACK TIMING AND SECURING

Timing and Securing Gear Racks

Procedure for timing and securing multiple gear rack pieces.

STAIR RAIL MOUNTING

Rail Positioning and Bracket Securing

Steps for positioning the rail and securing brackets to stairs.

CHASSIS INSTALLATION

Mounting the Stair Lift Chassis

Instructions for placing and aligning the chassis onto the rail.

CHAIR ROOSTER INSTALLATION

Attaching Rooster to Chassis

Steps for attaching the chair rooster to the chassis.

SEAT ASSEMBLY INSTALLATION

INITIAL CHASSIS POWER-UP AND TEST

Chassis Power Switch and Test Run

Turning on the chassis and performing an initial lift test run.

VERIFYING LIFT OPERATION AND SAFETY

AUDIO ALERTS AND TROUBLESHOOTING

Diagnosing Faults via Audio Alerts

Interpreting beep codes to diagnose and troubleshoot lift problems.

MANUAL LOWERING TOOL USAGE

Manual Lowering Procedure

How to use the manual lowering tool to disengage the final limit switch.