24
❶
❷
❸
❹ ❺
2. Unbuckle harness straps by
pressing on the RED buckle
release buon and by pulling the
buckle clips out ❸. Move harness
straps to the side.
3. Place child in child restraint with
child’s back at against back of the
backrest.
4. Adjust headrest height so that
the boom of the headrest is
even with the top of the child’s
shoulders.
5. Place harness straps over child’s
shoulders and insert the two-piece
buckle clip into buckle unl they
‘click’ into place ❹.
! ENSURE that the buckle is properly
fastened by gently tugging on it
and that the colour indicator has
turned to GREEN ❺.
! ENSURE that the straps are NOT
twisted.
! DO NOT use child restraint if harness does not lock.
6. Tighten harness system by gently pulling on the up-
front harness adjuster strap unl all slack is removed
from the system ❻.
To Next Page
Loading...
