Harmony Optyma Harnessed - Entanglement with Shoulder Belt; Using Cup Holder (When Applicable)

32
ENTANGLEMENT WITH SHOULDER BELT
! WARNING: To avoid possible entanglement and
choking with your vehicle’s shoulder belts, Harmony
Juvenile Products recommends that the following
precauons are taken when installing your booster seat:
1. Pull the shoulder poron of the vehicle seat belt all
the way out unl the retractor locks.
2. SLOWLY let the seat belt retract unl it is snug against
your child.
3. ENSURE that the seat belts do not press on the
child’s esh or push the child’s body into an unnatural
posion.
4. Do the same for all unused vehicle seat belts.
! Teach your child that seat belts are not toys and should
NEVER be played with, regardless of whether the car is
in moon or not.
! ALWAYS be aware of what your children are doing in
the back seat.

TO INSTALL:
1. Slide cup holder into place over cup holder clip ❶❷
on either side unl locked in place.
TO REMOVE:
1. Pull cup holder up and outward.
❶ ❷