EasyManua.ls Logo

Harmony Optyma Harnessed - Page 31

Harmony Optyma Harnessed
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
31
1. Place child in the booster seat with child’s back at
against the back of the booster seat.
2. Thread shoulder
belt poron of
the 3-point lap-
and-shoulder belt
system through the
shoulder belt guide
and ensure that shoulder belt
lies across child’s shoulder and
chest, and NOT across child’s face
or neck.
3. Thread both sides of the lap belt and the lower end
of the shoulder belt of the 3-point lap-and-shoulder
belt system UNDER BOTH booster seat armrests
and ensure that the belt is snug across child’s
hips. It is important to ensure that any lap strap is

just touching their thighs and is NOT across their
stomach.
4. Buckle the vehicle seat belt into place and ensure it is
secure by gently pulling on it.
! BOTH SIDES OF THE LAP BELT AND THE LOWER END
OF THE SHOULDER BELT MUST PASS UNDER BOTH
ARMRESTS.
! Any straps holding the restraint to the vehicle should
be ght, any straps restraining the child should be
adjusted to the child’s body, and all straps should not
be twisted.

Related product manuals