Figure 2-4. Base of GATES Transmitter
CONTROL/INDICATOR FUNCTION
Power Transformer A19T1 Main Power Supply transformer for 260 volt dc supply.
PDM Pullup Resistors Shield shown covering 250 watt resistor(s) used by PDM Pull-up circuits.
Low Voltage Transformer A20T1 Secondary for +20VDC, -20VDC, 24 VAC, and IPA Supply (60/75/90/105/120 Vdc).
Table 2-5. Base of GATES Transmitter
2-8 888-2314-001 Rev. AC: 2/29/00
WARNING: Disconnect primary power prior to servicing.
To Next Page
Loading...
