HART MicroLink 101-0027C User Manual

Installation
Operation &
Specifications
Manual
R3C © Microfl ex 2021
General Description
The MicroLink 101-0027C is a USB HART® protocol modem. It provides the
hardware interface between Highway Addressable Remote Transducer devices
(HART) and a Windows® PC with a USB-C interface. MicroLink is used for
commissioning, diagnos cs, monitoring, and tes ng HART fi eld devices.
Virtual serial port drivers allow the USB MicroLink modem to appear as an
RS-232 com port to Windows and your HART so ware.
A rugged design makes MicroLink an ideal choice for fi eld engineers and
technicians who service HART devices in an industrial environment.
MicroLink is compa ble with all registered HART devices and all leading HART
confi gura on and monitoring so ware.
101-0027C
HART Protocol Modem - USB Interface

HART MicroLink 101-0027C Specifications

General

Brand	HART
Model	MicroLink 101-0027C
Category	Modem
Language	English

Summary

Product Overview

USB Driver Pre-Installation

Manual Driver Installation (INF)

Uninstalling USB Drivers

Finding COM Port Number

COM Port Assignment via Device Manager

Software and HART Device Connection

HART Software Configuration

Configure HART software with the assigned serial COM port number for modem communication.

Connecting the Modem to HART Device

Connect the MicroLink modem to the HART device or loop using included clips, ensuring proper connection.

Safety and Compliance Information

MicroLink Hardware Specifications

Enclosure Details

Details on the modem's physical enclosure material, weight, and dimensions.

USB Interface Specifications

Information on USB connector type, cable length, and active/suspend current requirements.

HART Protocol Specifications

Details on HART termination, leads, connection method, DC loop voltage, jitter, and threshold.

Environmental Operating Conditions

Operating and storage temperature ranges, and humidity limits for the modem.

MicroLink Limited Warranty