Need help?Do you have a question about the Hartke Kickback KB12 and is the answer not in the manual?
General| Type | Bass Amplifier |
|---|---|
| Speaker Size | 12 inches |
| Speaker Type | Aluminum Cone |
| Shape Circuit | Yes |
| Limiter | Built-in limiter |
| Inputs | 1 x 1/4" Instrument Input |
| Outputs | 1 x XLR Direct Output |
| EQ | 3-band EQ |
| Dimensions | 473 mm x 473 mm x 305 mm |
Connect your bass guitar using a standard ¼" instrument cable.
Controls the overall volume of the amplifier for desired sound level.
Activates a special equalization curve designed to enhance bass sound.
Fine-tunes the Shape curve by applying a filter to a selected frequency.
Adjusts the low-frequency response by boosting or attenuating.
Adjusts the mid-frequency response by boosting or attenuating.
Adjusts the high-frequency response by boosting or attenuating.
Provides a mic-level balanced output for mixers or recording consoles.
Connect headphones for practice; disconnects the speaker output.
Powers the amplifier on or off; illuminates red when powered on.
Connect the grounded AC power cord to the amplifier for mains power.
Houses the fuse; replace with one of the same exact rating.
Selects the amplifier's operating voltage for your country.
Connects to an external speaker cabinet, recommended to use 4 ohm.
To Next Page
