Harvil RM-1 - Page 15

To Next Page

To Previous Page

STORAGE

RM-1

1. To store the equipment, simply keep it in a clean dry place.

2. Grasp the Front and Rear Stabilizer to move the equipment. Do not use the Seat to move the

equipment. The Seat will move and the Seat Carriage may pinch your hand or ngers.

3. To avoid damage to the electronics, remove the batteries before storing the equipment for

one year or more.

Follow the following process to fold the equipment

as illustrated for easy storage.

A. Slide the SEAT(42) to the front end of the CENTER

BEAM(1). Remove the LOCKING KNOBS(13) from

the PIVOT CONNECTOR(10).

B. Swing the LEFT and RIGHT HANDLEBARS(17, 18)

backward. Then fold the EXTENSION ARMS(14) to

the front.

C. Lock the handlebars in the folded position by

screwing the LOCKING KNOBS(13) onto the

PIVOT CONNECTOR(10). Now, you can store the

equipment in the place you want.

D. Refer to illustration D. You can stand the

equipment on end for storage.

NOTE: Keep ngers clear of all pinch points when

folding and unfolding the equipment.

Folding the Harvil Hydraulic Resistance Rowing Machine