Make sure trigger lock is locked. Tilt front of blaster up. Lift hopper lid. Add
rounds to hopper. DO NOT OVERFILL. Includes
40 rounds; additional rounds not included.
Close lid. Hopper lid must be fully closed for
blaster to fire.
LOAD
FIRE SLAM FIRE
1 2 3
Move trigger
lock to unlocked
position.
Hold down trigger and keep moving slide all the way back
and all the way forward to fire the rounds more quickly.
Please note that the rounds will only fire as fast as the
gravity-fed system loads them into the chamber.
Point front of blaster level or tilt it down -- DO NOT TILT IT UP. Tilting
blaster up when priming may not allow the gravity-fed loading system to
feed a round into the chamber. PULL PRIMING SLIDE ALL THE WAY BACK,
THEN PUSH IT ALL THE WAY FORWARD. Ready indicator will appear on end
of blaster. Blaster is primed when ready indicator is visible.
Adjust blaster to aim it toward
your target. Press trigger.
2
3
1
READY
INDICATOR
TRIGGER LOCK
On side of blaster, move trigger lock
down to lock trigger and up to unlock.
Always put the trigger lock in locked
position when blaster is not in use and
when storing blaster.
X
50
MAXIMUM
To Previous Page
Loading...
