-4-
CAUTION: TO AVOID BATTERY LEAKAGE
1) Be sure to insert the batteries correctly and always follow
the toy and battery manufacturers' instructions;
2) Do not mix old and new batteries or alkaline, standard
(carbon-zinc) or rechargeable (nickel-cadmium) batteries;
3) Always remove weak or dead batteries from the product.
INSTALLING BATTERIES:
1.)
Use a Phillips screwdriver to loosen the two
captive screws that secure the battery door
in back, and remove the door.
2.) Open the compartment door. Insert four
"AA" batteries into the compartment. Close
the compartment door, then insert four "D"
batteries on top as shown. (Re-chargeable
batteries, such as NiCd or NiMH, will work
well for the "D" cells, but are not
necessary for the "AA" batteries.)
3.) Replace the battery door, and securely
fasten the screws.
BATTERY
DOOR
AA
BATTERIES
D
BATTERIES
COMPARTMENT
DOOR
To Next Page
Loading...
