Hasbro R2-D2 84895 - R2-D2 Assembly; Droid Assembly Steps

-3-
ASSEMBLY AND BATTERIES
R2-D2 will be ready for action after the following power up procedures:
DROID ASSEMBLY:
1.) Snap the head/projector piece onto the main unit.
2.) Snap the side legs onto each side of the main unit.
3.) As an option, you may also remove the sensor array from the top of R2’s dome and use the
included telescope piece to extend it from his head.
HEAD/PROJECT
PIECE
STEERING
LEG
STEERING
LEG
SENSOR
ARRAY
TELESCOPE