Hasselblad 503CW - Page 11

EI
'o
elosing
the
Fnmsing
Hood
Fold
away
the magnifier
by
pressing
it
back
down
towards
the
lid
until it
locks into place.
'Pinch'in
the
side
plates
at
the hinge points
and then
push
the lid lightly
backwards.
The hood
then
automat-
ically
folds
back
down.
Removing
the
t{finding
erank
Push
the catch
lever
downwards
while
rotatins
the
crank
counter-clockwise.
Then
pull
the
c"rank
straight
out
from
the shaft.
Attaching
tile
Winding
Crank
Attach
the
crank to
the
shaft,
aligning
the
smaller
triangular
index
mark
against
the
red
dot
just
above
the mount.
Keep
the crank pushed
against
the camera
while
turning
it clockwise
until
the
larger
triangular
mark
is aligned
with the
red
dot.
:-2
Getting
Started