Hasselblad 503CW Instruction Manual

El
'CI
Magazine Load
Status
In
the centre of the
film holder key
there
is
a cres-
cent-shaped indicator
window
that shows
white
when the magazine is freshly loaded. It
gradually
changes to
red
as the
film is
wound through.
An
all red indicator shows that either the film is used
up or that the magazinc is empty.
Remouing Film
from
the
Magazine
When the last frame has been exposed and wound
on, the magazine blocks the camera for further
release.
Wind off the film
by
folding
out the
film winding
crank, and rotate it clockwise until
you
can feel
the film leaving the
supply spool.
You
can now withdraw the film holder from the
magazine
and
remove
the exposed
film.
The frame counter is automatically reset
when
the
film holder is withdrawn from the masazine.
Film Tab Holder
The end tab of the film
pack
can be inserted in the
holder
on the back of the magazine as a reminder
of the
kind
of
lllm
that
has
been
loaded into
the
magazlne.
12
MagaTine Operation

Hasselblad 503CW Specifications

General

Camera Type	Medium format SLR
Exposure Modes	Manual
Focus	Manual focus
Lens Mount	Hasselblad V mount
Shutter Type	Focal-plane shutter
Flash Sync	1/90 sec
Metering	External metering required
Viewfinder	Interchangeable viewfinders (waist-level, prism)
Shutter Speed	1 sec to 1/500 sec, Bulb
Flash Sync Speed	1/90 sec