EasyManuals Logo

Hasselblad 503CW Instruction Manual

Hasselblad 503CW
39 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
$trap Attachment
Place
the main body of the
strap clip over one of
the camera's strap lugs.
Press the tip of the clip
towards
the camera while
pulling
back on the
strap
so that the clip slides over the lug
and
locks
lnto
posltlon.
Removing
the
$trap
Lift the
clip
locking
plate
high enough
to be able
pass
over the
camera
lug.
Slide the clip in
the
direction away from
the strap until it is free.
Left
Hand
Grip
Without a Winder
CW attached. mav find that
holding
the camera in
your
left hand is
the
most
convenient
grip;
operating the exposure release
button with
your
index finger.
Your right hand is
then free
for focusing, setting
the exposure,
rewinding,
and changing the lens or magazine.
Exposure Release
Before
you
can
take a
photograph, you
must
remove the magazine
slide. The magazine will
then be locked on the camera
bodv. and the cam-
era
release
button will be unlocked.
After exposure, the viewfinder
remains dark until
you
have rewound
the camera by one full
turn of
the crank, which also
advances the film.
Getting Started

Other manuals for Hasselblad 503CW

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hasselblad 503CW and is the answer not in the manual?

Hasselblad 503CW Specifications

General IconGeneral
Camera TypeMedium format SLR
Exposure ModesManual
FocusManual focus
Lens MountHasselblad V mount
Shutter TypeFocal-plane shutter
Flash Sync1/90 sec
MeteringExternal metering required
ViewfinderInterchangeable viewfinders (waist-level, prism)
Shutter Speed1 sec to 1/500 sec, Bulb
Flash Sync Speed1/90 sec

Related product manuals