Hasselblad 503CW Instruction Manual

ltl
'o
This section describes
how to
prepare
your
camera
for
use as
well as
the
basic
operations.
Follow the
instruc-
tions
step-by-step
to avoid damaging
the equipment.
Getting
$tanted
Check
that the
winding crank on
the right hand side of
the camera
is
locked thus
ensuring
that
the camera
is
fully wound. lf the crank
is not locked,
rotate it clock-
wise until
it
does
lock, thereby
winding the camera.
Front
Protectiue Gouer
Turn the cover
(bayonet
fitting) in the direction
of
the arrow
and lift
it
out.
Do not
remove it until
you
are
ready to attach a
lens.
The frant
profective
csvetr
can only' be
remaved
when the camera
is
{ullv
wound.
Rear
Prstective
Couer
Depress the catch,
tilt the cover backwards,
and
lift
it
off.
Do not remove
it though until
you
are
ready to attach a
magazine.
Always replace
the cover to
protect
the auxiliary
shutter
when storing the
camera body without
a
masazine attached.
Getting Started

Hasselblad 503CW Specifications

General

Camera Type	Medium format SLR
Exposure Modes	Manual
Focus	Manual focus
Lens Mount	Hasselblad V mount
Shutter Type	Focal-plane shutter
Flash Sync	1/90 sec
Metering	External metering required
Viewfinder	Interchangeable viewfinders (waist-level, prism)
Shutter Speed	1 sec to 1/500 sec, Bulb
Flash Sync Speed	1/90 sec