Hasselblad 503CW Instruction Manual

tll
'o
Attachinu
the Hasselblad
Flash
Adaptors SCA
390 and SGA 590
For
hand-held flash units,
either adaptor
is
attached as shown
in the adjacent
illustration:
.
the 6-pole
contact
from the spiral cord
is con-
nected to the camera's
side socket
.
the sync cord
is connected
from the adaptor
to
the
PC flash terminal
of the lens
.
the connecting cord
is attached to the
hand-
held unit
Selling
the Film
$peed
The film speed is set
via the ISO selector.
This is
divided
into
ISO/ASA settings
from 16
-
1000
(the
equivalent
in DIN ratings can
be found on
page
27).
Certain
films
require compensation
for
differences
in reflection.
In
these
instances, the
compensation
is made
by changing the
film speed
selector setting.
The amount of
compensation
has
to be determined by
experiment.
26
Flash

Hasselblad 503CW Specifications

General

Camera Type	Medium format SLR
Exposure Modes	Manual
Focus	Manual focus
Lens Mount	Hasselblad V mount
Shutter Type	Focal-plane shutter
Flash Sync	1/90 sec
Metering	External metering required
Viewfinder	Interchangeable viewfinders (waist-level, prism)
Shutter Speed	1 sec to 1/500 sec, Bulb
Flash Sync Speed	1/90 sec