tll
'o
NF6
Ths lilinder CW
The Winder
CW
is a compact and ergonomically
designed
motorized
unit
providing
not only a
motor drive facility but also a comfortable and
robust
grip.
Continuous exposure
(0.8
frames/sec)
and multiple exposure
modes
are also
featured.
The
camera
can be released manually for hand
held
photography,
or when
mounted
either by
a
simple electric remote control lead or by a unique
infrared transmitter.
Remove the camera strap if attached. Remove the
winding crank and
the lens. Align the winder coup-
ling to the camera body coupling, ensuring that
the strap
lug is inserted in the winder's mounting
plate.
Rotate winder clockwise until it snaps
into
position.
The winder
immediately
senses the
sta-
tus of the camera body
(this
reaction can be faint-
ly heard) and then
winds
the camera automatic-
ally if necessary.
Removing
the Winder
CW
Remove the
lens.
While
firmly
gripping
the
winder, depress the detaching
lever with the
thumb. Rotate the winder counter clockwise,
keeping the lever depressed, and withdraw the
unit
from
the camera body.
29
Accessories
To Next Page
Loading...
