71
CONTENTS
CFV 100C
User Manual
Manual Focus
Manual Focus in Live View
1. Double-tap the touch display or press the rear scroll wheel (when set to zooming in) to
zoom in on the image to 100% of the original size to check the focus area details.
2. Rotate the focus ring of the lens to focus.
3. Double-tap again to zoom out of the image to full image.
Users can also activate autofocus by tapping on the touch display when Touch AF is enabled
in the settings. Follow the instructions below to set:
Go to Main Menu > Focus, scroll to the bottom, and then enable Touch AF.
There are three focus assists for manual focus, Focus Peaking, Auto Zoom, and Focus
Indicator. Refer to the following section for more information.
If Auto Zoom is selected, the camera will automatically zoom in to 100% when rotating the
focus ring. It will return to full image after a few seconds of inactivity.
Enabling MF Assist
Go to Main Menu > Focus > MF Assist, and then select the desired assist.
• In Full Auto Exposure Mode, MF Assist is set to Focus Indicator when using Manual Focus
Mode. Users cannot change the setting.
• When using with cameras other than the 907X, only Focus Peaking is available for MF
assist.
To Next Page
Loading...
Need help?
General
